Machine parts

Carriage systems

Abrasive system AWJ 942100

• Carriage system pneumatic
• Width 45 mm

• Carriage system manual, pivoted
• Width 100 mm

Pure water system WJ 942000

• Carriage system pneumatic
• Width 75 mm

• Carriage system manual
• Width 100 mm

High-Pressure sensor

Advantages

• Robust stainless steel design.
• Components that come into contact with the media are made from grade 1.4542 stainless steel.
• High excess pressure safety.
• High resistance to acceleration and vibration.
• Outstanding long term stability.
• IP65 protection.
• Compact construction.

• 0 ... 1000 bar bis 0 ... 6200 bar
• 0 ... 15.000 psi bis 0 ... 90.000 psi

• Connection: 1/4" HP (M16x1,5)
• Auxiliary power: 12 ... 30 VDC
• Output signal: 4 ... 20 mA, 2-channels
• Isolation resistance between the housing and the electrical connection: > 1000 MO bei 50 VDC
• Isolation voltage: 350 VAC
• Power consumption: max. 20 mA at 4 ... 20 mA output-signal
• Difference in characteristics in accordance with DIN 16 086: 1% from M.E.
• EC-Mark/EMC:
  Interference in accordance with EN 50 081-1 (March 1993)
  Resistance to interference in accordance with EN 50 082-2 (March 1996)
• Electrical connection: 4-pin angle plug in accordance with DIN 43 650, cable connection
• Protection in accordance with EN 60 529/IEC 529: IP65
• Weight: approx. 0.1 kg

Digital display for the pressure sensor

Advantages

• 5-point, 14 mm high LED display.
• Input signal 0/4–20 mA and 0–10 VDC.
• Up to 20 readings/second.
• Plug in option card for analogue output, limiting contacts and serial interface.
• Easy to programme using buttons on the front or via a PC.
• IP65 protection.

• Measuring principle: Micro-processor controlled display with a 16 bit A/D adaptor.
• Measuring range: 20 mA (-2 ... 26 mA).
  Overload: 150 mA.
• Measuring range: 10 VDC (-1 ... 13 VDC).
  Overload: 300 VDC.
• Measuring rate: up to 20 measurements/second.
• Display: 5-point LED, 14 mm high.
• Measuring unit presentation: backlit display field.
• Housing material: shockproof plastic housing.
• Auxiliary power: 85 ... 250 VAC / 50/60 Hz, optional 11 ... 36 VDC or 24 VAC +/- 10%.
• Power consumption: 15 VA or 11 W.
• Sensor power: 24 VDC +/- 5%, set at max. 50 mA.
• Difference in characteristics: 0.03% (from 18 to 28° C) 0.12% (in the range of 0…50° C).
• Integrated functions: Minimum and maximum value memory, totaliser, strip filter, linear readings over 2 to 16 bases.
• Serial interface: optional plug in card with RS-232 Isolation voltage: 500 VDC against signal input.
• Response time (0 ... 99%): < 200 ms.

Maximum pressure gauge 6200 bar

Advantages

• Sturdy design.
• Protection system IP54 or IP65 (liquid-filled).
• Range of application up to end scale value.
• Overload range 1.3 x.
• Dry or filled.

• Connection: 9/16-18UNF internal or M16x1.5.
• Temperature ranges:
  operating temperature -25°–60° C.
  liquid-filled -45°–120° C.
  Max. temperature of measuring substance 120°C.
  Max. temperature effect 0,3%/10K.
• Dry weight: 1,4kg.
• Filled weight: 2kg.
• Class: 0,5%.
• Nominal size: 41/2" (115mm).
• Design: solid front, aluminium housing, screwed ring.
• Measuring system: stainless steal 316SS

Cutting supports

Stainless steel cutting supports for pure water

Advantages

• Honeycomb structure in grade 1.4301 stainless steel.
• Almost free from wear and tear with a much longer usable life than aluminium.
• Narrow bridge widths of 0.1mm guarantee minimum water return on cut items.

• Laser welded honeycomb structure.
• Standard support height 20mm, other heights available on request.
• Bridge width 0.1mm, other widths available on request.
• Standard cell sizes 6.35mm and 8mm, other sizes available on request.
• Available tailor made to the required dimensions; we recommend supports of no wider than 1.5m on the basis of replaceability and logistics costs.
• Available with or without frames.

Since stainless steel cutting supports can be individually made to your requirements, we can advise you on the most suitable solution.

Cutting supports for use with abrasives
We can provide you with an individual solution. The sketch opposite is one possible suggestion. Please contact us in order to clarify your requirements.

Collision protection system

Operation

• Z-axis-regulation inclusive Collision-Protection System

• Clamp fixing on cutting head
• Adapters for various nozzle tube

Collision protection system 940500

• Control: fluctuating

Collision protection system 940550

• Control: 0–1 signal