Coning tools

Advantages

• Precision quality cones on all HP-tubings.
• Optimum surface finish on the 57° – 58° sealing cone.
• Fast and easy manual machining with self-centering double cutter. Fine feed adjustement.
• One tool holder with interchangeable precision collets for all size ALLFI HP-tubings.
• Checking of the cutting operation and reliable chip removal through two body openings.
• All tools and components are available from stock.

Threading tools

Advantages

• Reliable and fast machining of the left-hand threads on ALLFI HP-tubing ends.
• Precise threads concentric with the tubing cone.
• Same toolholder for the machining of all size ALLFI HP-tubings. Simply exchange the die and guide bushing for the corresponding thread size.
• Checking of the cutting operation and reliable chip removal through the two body openings.
• Tools in stainless steel.
• All tools are available from stock.

Cone seat reamer

Advantages

• Simple and fast remachining of the tubing cone seat in high pressure valves and fittings.
• Restores cone surface quality for highest sealing efficiency and safe cone-to-cone connections.
• Tools are available from stock.

Bending tools

Advantages

• The handy ALLFI bending tools for fast, accurate and simple bending of heavy wall high pressure tubings.
• Bending tools are available in three dimensions and are applicable for inch and metric high pressure tubings.
• For 1/4" and 6mm O.D. HP-tubing with the minimum bending radius of 25mm at max. operating pressure.
• For 3/8" and 10mm O.D. HP-tubing with the minimum bending radius of 50mm at maximum operating pressure.
• For 9/16" and 14mm O.D. HP-tubing with the minimum bending radius of 75mm at max. operating pressure.
• High pressure tubings should not be heated for bending in order to maintain their strength.
• Bending tools are available from stock.

Tool kit for working on high pressure tubes

Complete tool boxes for work (cone cutting, thread cutting, bending 1/4", 3/8" and 9/16‘’ high pressure tubes containing the following:

• Cone cutting tool with 3 collet sizes, thread cutting tool with 3 cutting die sizes and 3 guide bushes.
• Tube bending tool for 1/4" size.
• Operating kits from 1/4" to 3/8".
• 1 thread cutting paste.
• 1 tube of ASW 040P high-tech paste (protects metal from «attack»).

A bending tool for the 9/16" size must be ordered separately.

In addition, a box is only available for the 1/4" and 3/8" sizes.

Installation tool kit for changing seals on ALLFI cutting heads

Consisting of:

• Pilot.
• Punch.
• O-ring remover.
• Mounting key.
• 1 tube of ASW 040P high-tech paste (protects metal from «attack»).
• 1 tube of grease for O-rings.

Option
Installation tool kit with:

• 2 STANDARD sealing sets Art. No. 900630
• 1 Swivel joint Art. No. 900014